Mustang and Ford Performance Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
618 Posts
Discussion Starter · #1 · (Edited)
I have been thinking about Port Matching my heads to my Head to Intake gasket, since I gasket matched mine.

Want to know if is wort it? Are they any gains there?

Naz
 

·
Registered
Joined
·
105 Posts
I did it a long time ago. Dont know if I gained anything. Doubt it. I just cut some big sponges into squares and soaked them in wd-40, then wrang them out. I stuffed them into the ports and did a gasket match. Then I vacuumed the chips out that I could get, then slowly pulled the sponges out, to pull out the rest of the chips. Then I blew compressed air in there. The I soaked a rag in carb cleaner and wiped the ports out.
 

·
Registered
Joined
·
618 Posts
Discussion Starter · #3 ·
32VHEMIJR said:
I did it a long time ago. Dont know if I gained anything. Doubt it. I just cut some big sponges into squares and soaked them in wd-40, then wrang them out. I stuffed them into the ports and did a gasket match. Then I vacuumed the chips out that I could get, then slowly pulled the sponges out, to pull out the rest of the chips. Then I blew compressed air in there. The I soaked a rag in carb cleaner and wiped the ports out.
Thanks a bunch.

I'll let you know how it comes out.

Naz
 
1 - 3 of 3 Posts
Top