Mustang and Ford Performance Forums banner
1 - 7 of 7 Posts

·
Registered
Joined
·
141 Posts
Discussion Starter · #1 ·
Who has ported heads and what gains did you see? HP and Track times.

Did you go with the bigger valves or just a CNC?
 

·
Registered
Joined
·
1,280 Posts
port and polish with cams should get you around 75 HP
 

·
Registered
Joined
·
526 Posts
75 FWHP is probably pretty close with ported heads and cams. I got 51 HP to the tire on a Mustang Dyno through an Auto tranny.
I notice your in Ohio...Who did the work/tuning? What heads/cams are you running?
 

·
Registered
Joined
·
526 Posts
Columbus, I've had a hard time finding someone I'd trust to work on or tune my car in or near central ohio.
 

·
Registered
Joined
·
80 Posts
Columbus, I've had a hard time finding someone I'd trust to work on or tune my car in or near central ohio.
CRT is in Norwalk. They have always done a great job for me and im an ANAL nut. Jeff (who does the tuning/dyno stuff)works for NASA (dayjob)in Cleveland and usually gets into the shop around 5:00 p.m. and is there till after 8:00 during the week,his wife Tammy and the other guys arrive at 1:00 to open the shop and do alot of the mechanical work. WWW.CRT-PERFORMANCE.COM.
 
1 - 7 of 7 Posts
Top