Mustang and Ford Performance Forums banner
1 - 14 of 14 Posts

· The Ubiquitous Jimmy V.
Joined
·
3,319 Posts
Discussion Starter · #1 ·
What can i add without giving up too much comfort....Mods in Sig plus i am adding a line lock...

any good idea's will be appreciated..:)
 

· The Ubiquitous Jimmy V.
Joined
·
3,319 Posts
Discussion Starter · #3 ·
uncle jimmy you already know what im going to say hahaha
I want to stay N/A and keep tweaking..The Goal is go faster without becoming JUNK!!!!
 

· Registered
Joined
·
756 Posts
More converter (not sure if this is something your up for)
E85 tune (not sure if your up for buying the required injectors)
Gears (like previously mentioned)
Lightweight items (like previously mentioned - but I wouldn't recommend k-member/a-arms, but you are probably already aware of this...)
Adjustable struts/shocks
Battery relocation

Ok, there's my $.02
 

· Registered
Joined
·
1,368 Posts
If it were me....

1. I would slap the stock CAI back on and sell the Steeda.
2. Go for weight reduction such a lightweight bumper supports, lower radiator support, lightweight seats such as what Corbeau offers, etc...
3. 4.10 rear gear.
4. Driveshaft loop.

You have enough power, make the car more efficient. ;)
 

· Registered
Joined
·
338 Posts
Upper and lower control arms.
 

· The Ubiquitous Jimmy V.
Joined
·
3,319 Posts
Discussion Starter · #13 ·
Jimmy, this isn't going to make you any faster, but it gets rid of the real pain in the ass checking the trans fluid. The PA deep pans with dipstick are now available.
Thank's for the tip..just ordered mine.... :)
 

· The Ubiquitous Jimmy V.
Joined
·
3,319 Posts
Discussion Starter · #14 ·
I added a SLP line lock today also,,Should help heat the tires better... :dancinlock:
 
1 - 14 of 14 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top