Mustang and Ford Performance Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
216 Posts
Discussion Starter · #1 ·
If you've been on here for a while you may have seen some of the heads and other parts I've sold from a purchase I made of excess inventory at Roush Yates. If you don't know, Roush Yates used to run the engine program for all Fords running in the IMSA road racing series. I purchased a lot of their old inventory when they were switching engine platforms and have since sold (mainly on here) everything I had that was in a usable condition. What I'm listing here now is what's leftover.
I have multiple sets of ported Ford GT heads with oversized valves, ported FR500 heads with oversized valves, big bore blocks, and some other accessories. All of them have been modified for racing and are not stock. NONE of these parts are ready to install without repair or additional parts. In my opinion all of these components can be repaired and used or sold, I just don't have the time or desire to do the work.

So, here's what I have:

7 pairs of Ford GT heads. Missing or mismatched cam caps.
2 pair of FR500 heads. Missing or mismatched cam caps.
4 left side FR500 heads. Missing or mismatched cam caps.
3 FRPP M6010-T50 blocks. All need sleeves and weld repairs.
A bunch of assorted small parts.

I want to sell this as a bundle, I'm not interested in selling individual components. To the person willing to put the time and resources into this they will have good parts worth much more than I'm asking.
I would like to get $5,000 but am open to reasonable offers. Sorry, I will not ship but would consider meeting part way.
Feel free to message me for more pictures and details.
175696
175697
 

·
Registered
Joined
·
433 Posts
Let us know when you decide to ship the parts and offer the cylinder heads as individual pairs.
 
  • Like
Reactions: mercenvy

·
Registered
Joined
·
216 Posts
Discussion Starter · #3 ·
Let us know when you decide to ship the parts and offer the cylinder heads as individual pairs.
My main concern with shipping is I would prefer people see and understand what they are getting. I really don't want someone to not understand what these are and what condition they are in. That said, if someone was interested in all of the heads and is familiar with what these are I would consider shipping the heads if the deal was right and I was sure they understood the work involved in making them usable.
I am not interested in selling them in individual sets.
 
1 - 8 of 8 Posts
Top