so i went to start my car the other night to no avail. the key bumped over to power on the fuel pump radio and what not but after it made that inital flip the key just free flaoted between the start and accessory positions. i belived it to be the tumbler so i switched that. not the problem, checked the switch and that too looked to be ok. but when i look where the little lpost of the ig switch goes on the column. the peice there has no notches for the diffrent settings on the tumbler. i took a pic of the part that i belive to be bad this is on the bottom side of the column and this part is inside the column im not even really sure what its called. any way i was wondering if anyone on here had replaced this part and how hard/expensive it is? thanks for reading.
23.6 KB Views: 45