Billet 60mm compressor wheels
Polished housings
3" V-band exhaust flange welded on exhaust housing
T3 inlet exhaust flange
These were custom made for my application to run a lot of boost on my 2V mod motor.
Ultimately these made 953HP @ 39psi at 6100RPM through full length exhaust and auto transmission.
Rough calculations: these put out about 1200FWHP.
I admit that 39psi of boost was too much for these units but at 18psi these made 840HP.
These are in solid shape and make an incredible street/strip package with the right motor combo.
$750/pr.
You pay shipping
I take Venmo and PP
Kevin
![Handwriting Motor vehicle Automotive tire Automotive design Font]()
![Automotive lighting Motor vehicle Automotive tire Automotive design Rim]()
![Automotive tire Automotive lighting Gas Automotive wheel system Machine]()
![Automotive tire Motor vehicle Automotive lighting Automotive design Automotive exterior]()
![Rim Bicycle part Auto part Watch accessory Watch]()
Polished housings
3" V-band exhaust flange welded on exhaust housing
T3 inlet exhaust flange
These were custom made for my application to run a lot of boost on my 2V mod motor.
Ultimately these made 953HP @ 39psi at 6100RPM through full length exhaust and auto transmission.
Rough calculations: these put out about 1200FWHP.
I admit that 39psi of boost was too much for these units but at 18psi these made 840HP.
These are in solid shape and make an incredible street/strip package with the right motor combo.
$750/pr.
You pay shipping
I take Venmo and PP
Kevin
