Silicone elbow, maf adapter, clamps and filter no longer for sale, intake manifold and parts are still for sale
Vic Jr Intake, Sheet Metal Elbow, Rails
3
Edelbrock Victor Jr EFI 4.6 Intake Manifold, IntakeElbows.com Sheet Metal Upper w/ 90mm Opening, Fuel Rail Kit & Crossover setup from Modular Head Shop (adapts to stock fuel rails), and a set of FMS 30LB Injectors. Also have Race Parts Solutions Silicone Elbow, T Bolt Clamps, Silicone Maf Adapter and a large open end K&N style filter that was going to be used with a VMP 100mm MAF with this setup.
The intake, elbow, fuel rail kit are brand new, and have never been run, the injectors are used.
Setup was going to be used with TFS Heads, and MHS Cams, but car is being returned to stock and traded in. Would also work great on a blower or turbo setup! Another advantage to this setup, is you can run a carb nitrous plate, and spray a big shot without the fuel puddling issues of the PI intakes.
$750 SHIPPED for Intake, Elbow, Rails, and Injectors
$50 SHIPPED for RPS Silicone Elbow, Adapter, Clamps, and Filter
or $780 SHIPPED for everything
![]()
![]()
![]()
The intake, elbow, fuel rail kit are brand new, and have never been run, the injectors are used.
Setup was going to be used with TFS Heads, and MHS Cams, but car is being returned to stock and traded in. Would also work great on a blower or turbo setup! Another advantage to this setup, is you can run a carb nitrous plate, and spray a big shot without the fuel puddling issues of the PI intakes.
$750 SHIPPED for Intake, Elbow, Rails, and Injectors
$50 SHIPPED for RPS Silicone Elbow, Adapter, Clamps, and Filter
or $780 SHIPPED for everything
