Mustang and Ford Performance Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
124 Posts
Discussion Starter · #1 ·
Im going to the dyno tomorrow and i am wondering what kinda numbers i should expect w/ the mods i just installed plus what i had before. I just installed AR Chip, o/r x-pipe, 2.80 pulley and Spark plugs gapped at .035. I put down 395 hp and 372 lb-ft w/ just the cat-back and filter. Any ideas?
 

·
Senior Member
Joined
·
400 Posts
I would look for 465+hp and 480+ TQ. Also watch your a/f.
This oxygenated gas makes these cars run a little leaner. If it is more then 11.8 let me know. Good Luck! and keep us posted

Rick
 
1 - 2 of 2 Posts
Top